¡ß
Feature
Ez-MasterM¢ç
will make your dental porcelain work much better and easier.
(Save your time &
materials by using Ez-MasterM¢ç
Porcelain powder will
be mixed automatically and will be moisturized continuously
on the special filter
of Ez-MasterM¢ç. You will use the mixed porcelain powder
in
the most suitable condition
for build-up.
Ez-MasterM¢ç will be
effective for all dental technicians, from beginners to
masters.
|
¡ß
Direction for use
1. Soak
Micro Porous Ceramic Base(C) in
water sufficiently. (Peel the plastic off of
Ceramic base)
2. Place
the Ceramic Base (C) into the
Container.
3. Pour
distilled water or universal modeling
fluid over the ceramic base (Fill 1/3 of
the container with water)
4. Put
the soaked Absorption Paper(B) on
Ceramic base(c).
5. Put
the Metal filter(A) on the Absorption
paper(B).
6. The
moisture will pass through the Metal
filter(A) slowly.
7. Start
your porcelain build-up work after the
porcelain
powder is mixed with water or
modeling liquid.
|
A : Metal filter
B : Absorption paper
C : Ceramic base |
|
* Do not use the yellow papers placed between special
filters, this yellow
papers are a protection paper for the special
filters.
¡ß
Notice
1. Clean up Ez-MasterM¢ç
at least once two weeks regularly.
2. Bake the Micro Porous Ceramic Base
at 700 ~ 1200¡É in porcelain furnace
when
the Porous Ceramic Base has been polluted.
3. Metal filter
can be reused but be noticed not to crumple or fold it
when you handle the Metal Filter.
4. Absorption paper
can be reused nearly permanently by washing it under running
or boiling water. However, throw away the Absorption paper if it has been
polluted or torn. |
